王中王精选4肖中特

丹阳市赛尔机械有限公司

Service Hotline: 139-5127-0609
列管式冷却器、液压泵站-丹阳市赛尔机械有限公司 >> 行业动态 Position: Tubular cooler, hydraulic pump station-Danyang Saier Machinery Co., Ltd. >> Industry News
  • see details

    30 18-11

    Elaborate on the different structures of the tube and tube coolerThe most widely used tube and tube cooler is the plate and frame heat exchanger, which is a set of formed plates combined on a frame, in order to meet different flow rates, heat transfer and For temperature requirements, series and parallel lines can be configured in a wide range, but structural limitations make its use pressure and temperature not high. The second type is a spiral tube cooler, which is rolled by two parallel long plates in a spiral shape ..

  • see details

    30 18-11

    The structure and application of air cooler The structure of air cooler is widely used at home and abroad. The air cooler is made of aluminum alloy with good thermal conductivity. The fluid channel and air channel are advanced plate-fin structure. It is made by vacuum brazing, and the inner channel of the fluid channel is provided. Compared with the traditional copper tube type, the heat exchange area per unit volume is greatly improved, which is 10-20 times that of the traditional copper tube type structure. The heat exchange efficiency is particularly good ..

  • see details

    30 18-11

    Working principle of tube and tube cooler Working principle of tube and tube cooler

  • see details

    30 18-11

    How to glue the gasket of the tube cooler? (2) The gasket of the tube-type cooler is coated with a steel wire brush. The adhesive should be selected to ensure that the rubber and the steel plate have good adhesion. Generally, 704 milky white glue can be used. The glue should be evenly applied to the polished surface of the gasket and the sealing surface of the heat exchange plate. (3) When the gaskets of the tube-type cooler are bonded, the glue should be dried for 5 ~ lomin. Carefully put the gasket into the sealing surface of the heat exchange plate.

  • see details

    30 18-11

    Is there any way to remove oil from the tube cooler? To measure the pros and cons of the operation of an in-line tube cooler, in addition to its inherent equipment characteristics and process conditions, how to ensure the cleanliness of the heat exchange surface of the medium, ensure a good heat conduction space, and overall heat transfer efficiency are important factors. . The losses caused by the dirt of the tubular cooler equipment to industrial developed countries account for 0.3% of GDP on average. Atmospheric and decompression that is most prone to fouling in oil refineries.

Contact us
Consulting Hotline: 13951270609

Phone: 0511-86677699

Fax: 0511-86677039

Address: North of New Bridge, Lizhuang, Danyang City, Jiangsu Province

About UsProductsNewsMarketing NetworkContact UsSite Map XML Map

  • Fax: 0511-86677039
  • Mobile: 13951270609
  • Address of Company: North of New Bridge, Lizhuang, Danyang City, Jiangsu Province
Visit mobile site