Manual working process: After the water filter is connected to the pipe system, water enters the water filter from the lower water inlet. When impurities in the water pass through the mesh core, the volume is larger than the mesh core hole, and the radon is trapped on the mesh core. When the quantity is, it will cause a certain pressure difference between the water inlet and outlet. (Diameter of the filter is different, the pressure difference is different, generally 0.15Mpa), manually open the drain valve, start the blowdown, turn the handle, the rotation direction can be rotated clockwise or counterclockwise, every 10 seconds-30 seconds, one division, the handle points Each recess is fixed, and the water flow reversely flushes the impurities and dirt attached to the inner wall surface of the core. Until one rotation, close the drain valve and complete manual draining.
go back to the last page